GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Yukon XL - 2WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 606395 Size: SH
  1. Remove the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .
  2. Remove the park brake warning lamp switch mounting bolt.
  3. Remove the park brake warning lamp switch.

Installation Procedure

    Object Number: 606395 Size: SH
  1. Install the park brake warning lamp switch.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the park brake lamp switch mounting bolt.

    3. Tighten
    Tighten the bolt to 3 N·m (25 lb in).

  3. Install the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .