GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Yukon XL Denali 🢒 General Information 🢒 General Information 🢒 Range Selector Lever Cable Replacement

Removal Procedure

    Object Number: 1774414 Size: SH
  1. Position the steering column shift lever to the park position.
  2. Remove the instrument panel knee bolster. Refer to Knee Bolster Replacement .
  3. Remove the driver seat. Refer to Front Seat Replacement - Bucket .
  4. Pull back the carpet and insulation around the driver area.
  5. Remove the retainer securing the cable to the steering column.

    6. Object Number: 1774419 Size: SH
  6. Remove the cable end from the steering column ball stud.
  7. Depress the tangs and remove the cable from the steering column bracket.

    8. Object Number: 1774421 Size: SH

    Important: Avoid unnecessary twisting/bending of the range selector cable when removing the cable from the support.

  8. Remove the range selector cable from the support.

    9. Object Number: 858974 Size: SH
  9. Remove the cable grommet from the floor panel.
  10. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

    11. Object Number: 394470 Size: SH
  11. Remove the clips on the cable from the floor panel reinforcement.
  12. Ensure the transmission manual shaft is positioned in mechanical park.
  13. Remove the cable clip on the transfer case, if equipped.

    14. Object Number: 1707190 Size: SH
  14. Remove the range selector cable (2) from the transmission range selector lever ball stud.
  15. Remove the retainer (1) that secures the cable to the bracket.
  16. Depress the tangs and remove the cable from the bracket.
  17. Remove the transmission range selector cable from the vehicle.

Installation Procedure
  1. Install the transmission range selector cable to the vehicle.

    2. Object Number: 1707190 Size: SH
  2. Ensure that the transmission manual shaft lever is in the mechanical park position.
  3. Align and install the range selector cable (2) to the bracket.
  4. Install the retainer (1) that secures the cable to the bracket.
  5. Install the range selector cable end to the transmission range selector lever ball stud.
  6. Install the cable clip on the transfer case, if equipped.

    7. Object Number: 394470 Size: SH
  7. Install the clips on the cable to the floor panel reinforcement.
  8. Lower the vehicle and ensure that the steering column shift lever is still in the park position.

    9. Object Number: 858974 Size: SH
  9. Install the cable grommet to the floor panel.

    10. Object Number: 1774421 Size: SH

    Important: Avoid unnecessary twisting/bending of the range selector cable when installing the cable to the support.

  10. Install the range selector cable to the support.

    11. Object Number: 1774419 Size: SH
  11. Install the cable to the steering column bracket.
  12. Ensure the tangs fully engage into the steering column bracket.
  13. Install the cable end to the steering column ball stud.

    14. Object Number: 1774414 Size: SH
  14. Install the retainer securing the cable to the steering column.
  15. Position the carpet and insulation around the driver area.
  16. Install the driver seat. Refer to Front Seat Replacement - Bucket .
  17. Install the instrument panel knee bolster. Refer to Knee Bolster Replacement .
  18. Test the transmission for proper shift operation.
  19. If all of the gear positions cannot be achieved, adjust the cable. Refer to Range Selector Lever Cable Adjustment .