Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

1

Rear Upper Stabilizer Shaft Link Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
75 N·m (55 lb ft)

2

Rear Upper Stabilizer Shaft Link Bolt

3

Rear Lower Stabilizer Shaft Nut (Qty: 2)

Procedure

1. Use an Allen wrench to keep the lower stabilizer shaft ball stud from rotating while removing the outer nut.
2. When installing the inner stabilizer shaft link nut, ensure that it is tighten securely against the ball joint.

Tighten
75 N·m (55 lb ft)

4

Rear Stabilizer Shaft