Schematic Reference: Cruise Control Schematics

Connector End View Reference: Cruise Control Component Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

Turn ON the ignition, with the engine OFF.

Does the cruise indicator illuminate after the instrument panel cluster (IPC) displays test?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

1. Turn OFF the ignition.
2. Install a scan tool.
3. Turn ON the ignition, with the engine OFF.
4. With the scan tool, observe the Cruise Control parameter in the IPC Input/Output data list.

Does the Cruise Lamp parameter display On?

Go to Step 4

Go to Step 5

Replace the powertrain control module (PCM). Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 6

--

Replace the IPC. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 6

--

Operate the system in order to verify the repair.

Does the system operate properly?

System OK

Go to Step 2