GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Yukon Denali 🢒 Body and Accessories 🢒 Seats 🢒 Door Lock and Side Window Switch Replacement - Driver Side

Removal Procedure

    Object Number: 833288 Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Disconnect the electrical connectors.
  3. Remove the screw that retains the switch panel bezel (1) from the front door panel.

    4. Object Number: 811888 Size: SH
  4. Remove the switch panel bezel from the door panel using a flat-bladed tool.

    5. Object Number: 833442 Size: SH
  5. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
  6. Remove the door module from the switch panel bezel.

Installation Procedure

    Object Number: 833442 Size: SH
  1. Install the door module into the switch panel bezel until it snaps into place.

    2. Object Number: 811888 Size: SH
  2. Install the switch panel bezel and module to the door panel.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 833288 Size: SH
  3. Install the screw that retains the switch panel bezel (1) to the front door panel.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  4. Connect the electrical connectors.
  5. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming.