When working on this system, observe the following precautions:
| • | Before welding on the vehicle with an electric welding unit, complete
the following steps: |
| - | Turn the ignition switch OFF. |
| - | Disconnect the EBCM connectors. |
| • | Do not use a fast charger for starting the engine. |
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing
any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to
the vehicle or its components.
| • | Disconnect the negative battery cable
when fast charging. |
| • | Never disconnect the battery from the vehicle electrical system
while the engine is running. |
| • | Connect all wiring harness connectors securely. |
| • | Proper speed sensor wiring, routing and retaining are necessary
in order to prevent false signals due to electrical noise. You can achieve
proper system operation only by restoring the system to its original condition. |
| | When servicing the ABS, note the routing, position, mounting and locations
of the following items: |
Follow the above mentioned precautions when working on ABS. Familiarize
yourself with ABS and its relationships with other components on the vehicle.
