Tools Required

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the differential assembly. Refer to Differential Replacement .



3. Remove the differential side bearing by performing the following steps:

3.1.	Install the J 45711  (2) and the J 36597  (1) as shown.

3.2.	Remove the differential side bearing using the J 45711 and a hydraulic press.

Important: Mark the inboard shims left or right.

4. Remove the inboard shims.

1. Determine the shim thickness and preload for the differential assembly. Refer to Differential Carrier Bearing Preload Adjustment .



2. Install the differential side bearing by doing the following:

2.1.	In order to protect the differential case, install the J 8107-3 in the case on the side opposite of the bearing installation.

2.2.	Install the inboard shims.

2.3.	Install the differential side bearing.

2.4.	Install the J 24430 or the J 45900  (2) and the J 8092  (1) over the differential side bearing.

2.5.	Drive the differential side bearing into position using the J 24430 or the J 45900 and the J 8092 .

2.6.	Install the differential assembly. Refer to Differential Replacement .

3. Fill the axle with lubricant. Use the proper fluid. Refer to Front Axle Lubricant Replacement .
4. Lower the vehicle.