Brake Warning Indicator
The instrument panel cluster (IPC) illuminates the brake warning indicator
when one or more of the following occurs.
| • | The IPC detects that the park brake is engaged. |
| • | The electronic brake control module (EBCM) detects a low brake
fluid condition. The IPC receives a class 2 message from the EBCM
requesting illumination. |
| • | The EBCM detects an ABS malfunction which disables dynamic rear
proportioning (DRP). The IPC receives a class 2 message from the EBCM
requesting illumination. |
| • | The IPC performs the bulb check at the start of each ignition
cycle. The brake warning indicator illuminates for approximately 3 seconds
before turning OFF. |
| • | The IPC detects a loss of class 2 communications with the
EBCM. |
Service Brake Soon Indicator
The EBCM illuminates the service brake soon indicator whenever one of
the following occurs.
| • | The EBCM performs the bulb check at the start of each ignition
cycle. The service brake soon indicator illuminates for approximately 3 seconds
before turning OFF. |
| • | The EBCM detects a disabling malfunction in the hydromax
brake assist system. |
