Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Is the dome lamp illuminated? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Disconnect the door ajar switches one at a time. Does the dome lamp remain illuminated? | Go to Step 4 | Go to Step 5 |
4 | Disconnect the headlamp switch. Does the dome lamp remain illuminated? | Go to Step 7 | Go to Step 6 |
5 | Inspect for poor connections at the harness connector of the inoperative door ajar switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
6 | Inspect for poor connections at the harness connector of the headlamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
7 | Repair a short to ground in the dome lamp control circuit. Refer to Circuit Testing or Wiring Repairs . Did you complete the repair? | Go to Step 10 | -- |
8 | Replace the inoperative door ajar switch/lock assembly. Refer to Front Side Door Lock Replacement and Rear Door Lock Replacement . Did you complete the replacement? | Go to Step 10 | -- |
9 | Replace the headlamp switch. Refer to Headlamp Switch Replacement . Did you complete the replacement? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
