Electronic Brake Control Module Programming and Setup w/Air Antilock Brakes

The electronic brake control module requires a configuration procedure upon replacement.

If the electronic brake control module (EBCM) is replaced, the following procedure must be performed.

EBCM Configuration Procedure--Refer to Electronic Brake Control Module Configuration .

If the EBCM requires reconfiguration, the following procedure must be performed.

EBCM Configuration Procedure--Refer to Electronic Brake Control Module Configuration .

Electronic Brake Control Module Programming and Setup w/Antilock Brakes

To setup a new EBCM, perform the Tire/Wheel Base Calibration Procedure under the Special Functions menu of the scan tool.