Positive Crankcase Ventilation Hose/Pipe/Tube Replacement Left - LBZ, LLY

Important: After removing the charged air cooler duct, cover the turbocharger opening with tape in order to prevent entry of objects.

1. Remove the air cleaner. Refer to Air Cleaner Replacement .



2. Loosen the charged air cooler inlet duct connector to turbocharger clamp (1).

Important: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.

3. Remove the charged air cooler inlet duct connector (4) from the turbocharger.



4. Reposition the positive crankcase ventilation (PCV) hose clamp at the resonator tee.
5. Remove the PCV hose from the tee.



6. Remove the left PCV hose/pipe bolt.



7. Remove the left PCV hose/pipe assembly.

1. Install the left PCV hose/pipe assembly.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the left PCV hose/pipe bolt.

Tighten
Tighten the bolt to 18 N·m (13 lb ft).




3. Install the PCV hose to the tee.
4. Position the PCV hose clamp at the resonator tee.



5. Remove the tape from the turbocharger openings.

Important: Lubricate the end of the duct prior to installation.

6. Install the charged air cooler inlet duct connector (4) to the turbocharger.
7. Tighten the charged air cooler inlet duct connector to turbocharger clamp (1).

Tighten
Tighten the clamp to 6 N·m (53 lb in).

8. Install the air cleaner. Refer to Air Cleaner Replacement .

Positive Crankcase Ventilation Hose/Pipe/Tube Replacement Right - LBZ, LLY

Important: After removing the air cleaner outlet duct, cover the turbocharger opening with tape in order to prevent entry of objects.

1. Remove the air cleaner. Refer to Air Cleaner Replacement .



2. Loosen the charged air cooler outlet duct to intake hose clamp.

Important: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.

3. Remove the charged air cooler outlet duct from the intake.



4. Reposition the positive crankcase ventilation (PCV) hose clamp at the resonator tee.
5. Remove the PCV hose from the tee.



6. Remove the right PCV hose/pipe bolt.



7. Remove the right PCV hose/pipe assembly.

1. Install the right PCV hose/pipe assembly.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the right PCV hose/pipe bolt.

Tighten
Tighten the bolt to 18 N·m (13 lb ft).




3. Install the PCV hose to the tee.
4. Position the PCV hose clamp at the resonator tee.
5. Remove the tape from all turbocharger openings.




Important: Lubricate the end of the duct prior to installation.

6. Install the charged air cooler outlet duct to the intake.
7. Tighten the charged air cooler outlet duct to intake hose clamp.

Tighten
Tighten the clamp to 6 N·m (53 lb in).

8. Install the air cleaner. Refer to Air Cleaner Replacement .

Positive Crankcase Ventilation Hose/Pipe/Tube Replacement LMM

1. Remove the positive crankcase ventilation (PCV) pipe bolt from the left valve cover and disconnect the PCV pipe.



2. Remove the PCV pipe bolt from the right valve cover and disconnect the PCV pipe.



3. Compress the clamp (1) and disconnect the PCV pipe (2) from the air intake pipe (3).
4. Remove the PCV hose/pipe.

1. Position the PCV hose/pipe.
2. Compress the clamp (1) and connect the PCV pipe (2) to the air intake pipe (3).



3. Position the PCV pipe to the right valve cover and loosely install the PCV pipe bolt.



4. Position the PCV pipe to the left valve cover and loosely install the PCV pipe bolt.

Notice: Refer to Fastener Notice in the Preface section.

5. Tighten the right and left PCV pipe bolts.

Tighten
Tighten the PCV pipe bolts to 18 N·m (13 lb ft).