GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Sonoma Pickup - 2WD 🢒 Engine 🢒 Engine Mechanical - 2.2L 🢒 Oil Level Indicator Tube Replacement

Removal Procedure

    Object Number: 175480 Size: SH
  1. Remove the oil level indicator.
  2. Remove the oil level indicator nut and the bracket from the exhaust manifold.
  3. Remove the oil level indicator bolt from the heater hose pipe.
  4. Remove the oil level indicator tube and seal.

Installation Procedure

    Object Number: 175480 Size: SH
  1. Install the oil level indicator tube and seal.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the oil level indicator tube bracket and nut on the exhaust manifold stud.

    3. Tighten
    Tighten the nut to 12 N·m (106 lb in).

  3. Install the oil level indicator tube to heater hose pipe bracket bolt.

    4. Tighten
    Tighten the bolt to 14 N·m (10 lb ft).

  4. Install the oil level indicator.