GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Sonoma Pickup - 2WD 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 Accelerator Pedal Replacement

Removal Procedure

    Object Number: 350251 Size: SH
  1. Remove the accelerator controls cable. Refer to Accelerator Control Cable Replacement
  2. Remove the nuts to the cowl (2).
  3. Remove the pedal assembly (1).

Installation Procedure

    Object Number: 350251 Size: SH
  1. Install the pedal assembly (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts to the cowl (2).

    3. Tighten
    Tighten the nuts to 9 N·m ( 80 lb in).

  3. Install the accelerator controls cable. Refer to Accelerator Control Cable Replacement .