Preliminary Procedure

Remove the park brake release handle assembly from the knee bolster. Refer to Parking Brake Release Handle Assembly Replacement .

1

Instrument Panel Left Outer Trim Cover

Refer to Instrument Panel Outer Trim Cover Replacement .

2

Knee Bolster Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

3

Knee Bolster Assembly

Tip

1. Disconnect the electrical connectors.
2. If replacing the knee bolster assembly, transfer all necessary components.

4

Retainer Clip (Qty: 3)

Preliminary Procedures

1. Remove the left instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.
2. Remove the park brake release handle. Refer to Parking Brake Release Handle Assembly Replacement.

1

Knee Bolster Assembly Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Knee Bolster Assembly

Procedure

1. Disconnect the electrical connections. If applicable
2. When replacing the knee bolster assembly, transfer all necessary components.

3

Retainer Clips (Qty: 4)