Callout
| Component Name
|
Preliminary Procedure
| • | Ensure the bearings are installed squarely on the front output shaft. |
| • | Using a suitable adapter and an arbor press, remove the bearing assemblies from the front output shaft. |
|
1
| Transfer Case Front Output Shaft Rear Bearing Assembly
Tip
Using a suitable adapter and an arbor press, install the bearing until the bearing bottoms against the spacer. |
2
| Transfer Case Front Output Shaft Front Bearing Assembly
Tip
Using a suitable adapter and an arbor press, install the bearing until the bearing bottoms on the front output shaft. |
3
| Transfer Case Front Output Shaft Hole Plug
Tip
| • | Using a suitable adapter and an arbor press, remove the front output shaft hole plug by going through the front of the front output shaft. |
| • | Install the plug using the large side of the
DT-48212
. |
| • | Press the plug until the tool bottoms on the front output shaft. |
Special Tools
| • | DT-48212
Input Shaft Pilot Bearing Installer |
|
