GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Sierra - 4WD 🢒 Transmission/Transaxle 🢒 Transfer Case - MP 1222/1225/1226-NQG 🢒 Input Shaft Pilot Bearing Replacement

Input Shaft Pilot Bearing Replacement Light Duty


Object Number: 1843599 Size: MF

Callout

Component Name

Preliminary Procedure

Ensure the bearing is installed squarely into the input shaft bore.

1

Transfer Case Input Shaft Pilot Bearing

Tip

    • Using a suitable adapter and an arbor press, remove the input shaft pilot bearing by going through the front of the input gear.
    • Install the bearing using the small side of the DT-48212 .
    • Press the bearing until the tool bottoms on the input shaft.

Special Tools

    • DT-48212 Input Shaft Pilot Bearing Installer
    • J 8092 Driver Handle

Input Shaft Pilot Bearing Replacement Heavy Duty and Super Heavy Duty


Object Number: 1843600 Size: MF

Callout

Component Name

Preliminary Procedure

Ensure the bearing is installed squarely into the input shaft bore.

1

Transfer Case Input Shaft Pilot Bearing Retaining Ring

Tip
The pilot bearing retaining ring must be removed and installed before and after the pilot bearing is replaced.

2

Transfer Case Input Shaft Pilot Bearing

Tip

    • Using a suitable adapter and an arbor press, remove the input shaft pilot bearing by going through the front of the input shaft.
    • Install the bearing using the large side of the DT-48212 .
    • Press the bearing until the tool bottoms on the input shaft.

Special Tools

    • DT-48212 Input Shaft Pilot Bearing Installer
    • J 8092 Driver Handle