Modification Procedure for Assist Step Bracket Installation Due to Underbody Interference

Modification to the right hand second assist step bracket may be necessary for installation due to interference to the underbody.

1. Modify assist step bracket to create additional clearance between the assist step bracket and the cross-sill bracket. Modify the bracket following the dimensions in the illustration above.
2. Follow the manufacturer’s specifications for repainting. For the proper refinish materials, refer to the 2008 GMWI5406 GM Globally Approved Refinish Materials information. The refinish materials information is now online at the GMGOODWRENCH WEB SITE*. Printed books have been discontinued. To access the site, follow these steps:

•	Go to www.gmgoodwrench.com.

•	Click on For Body Shops & Services link at the bottom of the page.

•	Click on GM Technical Repair Information

•	Click on Paint Shop tab.

•	Select the applicable downloadable link of the GM Approved Refinish Materials Guide.

•	*In Canada, the 2008 GM Approved Refinish Materials information is also available on the GM infoNET under the Service and Body tab.

For vehicles repaired under warranty, use: