GM Service Manual Online
For 1990-2009 cars only

Object Number: 2073609  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the air conditioning compressor belt. Refer to Air Conditioning Compressor Belt Replacement.
  2. Remove the air conditioning compressor if necessary. Refer to Air Conditioning Compressor Replacement
  3. .

  4. Disconnect the electrical connector from the air conditioning compressor.

1

Air Conditioning Compressor Pulley Bolt.

Notice: Refer to Fastener Notice in the Preface section.

Tighten
18 N·m (13 lb ft)

2

Air Conditioning Clutch Drive Plate.

Procedure

Measure and adjust the air conditioning compressor clutch drive plate per specification. Refer to Air Conditioning Clutch Drive Plate Adjustment.

3

Air Conditioning Compressor Clutch Drive Plate Adjustment Shim.

4

Air Conditioning Compressor Clutch Pulley Snap Ring.

Procedure

Ensure the clutch pulley snap ring is installed with the flat side toward the air compressor. Note the rounded off portion of the snap ring per illustration, will be on the right side upon proper installation.

5

Air Conditioning Compressor Clutch Pulley.

6

Air Conditioning Compressor Clutch Coil Snap Ring.

Procedure

Ensure the clutch coil snap ring is installed with the flat side toward the air compressor. Note the larger portion of the snap ring per illustration, will be on the right side upon proper installation.

7

Air Conditioning Compressor Clutch Coil.