For 1990-2009 cars only
- Using a 13 mm wrench, remove the 7 screws from the bearing retainer.
- Using a screwdriver, remove the gear train cup.
- Remove the gear train adjustment shims.
- Remove the gear train spacer.
- Using a punch and a hammer, remove the drive shaft cup.
- Remove the drive shaft adjusting shims.
- Using a 10 mm wrench, remove the 2 screws from the anchor support assembly.
- Remove 3 anchor bushings and 3 springs, 2 pistons and anchor bolt.
- Using a 13 mm wrench, remove 2 screws from the oil baffle.
