For 1990-2009 cars only
- Place the transmission on a workbench.
- Using a 10 mm socket, remove the shift control housing bolt.
- Remove the shift control cover.
- Remove the park/neutral position and backup lamp switch.
- Using a 10 mm socket, remove the vehicle speed sensor housing bolt.
- Remove the vehicle speed sensor.
- Using a 10 mm socket, remove the 12 bolts from the transmission rear case.
- Using a rubber hammer, tap lightly in order to separate the transmission rear case from the transmission case.
- Remove the transmission rear case.
- Using pliers, remove the reverse gear blocking ring that secures the speedometer drive gear.
- Using a bearing puller, remove the speedometer drive gear.
- Using a magnet, remove the speedometer gear ball.
- Using retaining pliers, remove the 5th gear retainer from the main shaft.
- Using a punch and a hammer, remove the 5th shift fork.
- Remove the coupling cone from the 5th speed synchronizer assembly.
- Remove the synchronizer ring.
- Remove the 5th speed synchronizer assembly together with the fork.
- Remove the 2 roller bearings and spacer.
- Using a magnet, remove the drag ball.
- Remove the drive wheel.
- Using retainer pliers, remove the retainer that secures the gear train bearing race.
- Using a rubber hammer, tap lightly on the gear train to remove the bearing race.
- Remove the bearing race from the gear train.
- Remove the bearing.
- Using a 10 mm wrench, remove casing bolts that secure the housing.
- Using a rubber hammer, tap lightly on the casing to remove the sealer.
- Remove the casing.
