1

Drive Motor (w/Generator) Assembly - 1st Position

Warning: The generator motor weighs approximately 36 kg (80 lbs). Personal injury may result if you lift the generator motor improperly.

Caution: Carefully feed temp sensor and resolver connector thru case opening or damage may occur.

Tip
Replace with NEW seals while motor is on holding fixture.

2

Generator Drive Motor Bolt M6 x 1.0 x 20 (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Use trans assembly gel on O-rings for motor.

Tighten
Tighten bolt to 9-13 N·m (80-115 lb in).

Special Tool

DT-48473 Motor Lift Plate