GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Sierra Denali 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Rear Brake Hose Replacement

Rear Brake Hose Replacement Frame to Axle - JF3 w/o JL4, JF7


Object Number: 1850390 Size: MF

Callout

Component Name

Warning: Refer to Brake Dust Warning in the Preface section.

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Brake Pipe Fitting

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Remove any dirt or debris from the brake pipe fitting.
  2. Cap the brake pipe fitting to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

2

Hose Bracket to Frame Bolt (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Brake Pipe Fitting (Qty: 2)

Procedure

  1. Remove any dirt or debris from the brake pipe fittings.
  2. Cap the brake pipe fittings to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

4

Hose to Rear Axle Bolt

Tighten
9 N·m (80 lb in)

5

Rear Brake Hose

Procedure

Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.

Rear Brake Hose Replacement Frame to Axle - JD9, JF3, w/JL4


Object Number: 1850392 Size: MF

Callout

Component Name

Warning: Refer to Brake Dust Warning in the Preface section.

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Brake Pipe Fitting (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Remove any dirt or debris from the brake pipe fitting.
  2. Cap the brake pipe fitting to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

2

Hose Bracket to Frame Bolt (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Brake Pipe Fitting (Qty: 2)

Procedure

  1. Remove any dirt or debris from the brake pipe fittings.
  2. Cap the brake pipe fittings to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

4

Hose to Rear Axle Bolt

Tighten
25 N·m (18 lb ft)

5

Rear Brake Hose Assembly

Procedure

Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.

Rear Brake Hose Replacement Frame to Axle - JH6, JH7


Object Number: 1850397 Size: MF

Callout

Component Name

Warning: Refer to Brake Dust Warning in the Preface section.

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Brake Pipe Fitting

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Remove any dirt or debris from the brake pipe fitting.
  2. Cap the brake pipe fitting to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

2

Hose Bracket to Frame Nut

Tighten
25 N·m (18 lb ft)

3

Brake Pipe Fitting (Qty: 2)

Procedure

  1. Remove any dirt or debris from the brake pipe fittings.
  2. Cap the brake pipe fittings to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

4

Hose to Rear Axle Bolt

Tighten
25 N·m (18 lb ft)

5

Rear Brake Hose Assembly

Procedure

Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.

Rear Brake Hose Replacement Caliper - JD9


Object Number: 1850386 Size: MF

Callout

Component Name

Warning: Refer to Brake Dust Warning in the Preface section.

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Brake Hose Fitting Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
40 N·m (30 lb ft)

2

Brake Hose Fitting Gasket (Qty: 2)

Procedure

  1. Discard the brake hose fitting gaskets.
  2. Install 2 new brake hose fitting gaskets.

3

Brake Hose Fitting

4

Brake Pipe Fitting

Procedure

  1. Remove any dirt or debris from the brake pipe fitting.
  2. Cap the brake pipe fitting to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

5

Hose Bracket to Rear Axle Bolt

Tighten
9 N·m (80 lb in)

6

Brake Hose

Procedure

Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.

Rear Brake Hose Replacement Caliper - JH6, JH7


Object Number: 1850388 Size: MF

Callout

Component Name

Warning: Refer to Brake Dust Warning in the Preface section.

Warning: Refer to Brake Fluid Irritant Warning in the Preface section.

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Brake Hose Fitting Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
40 N·m (30 lb ft)

2

Brake Hose Fitting Gasket (Qty: 2)

Procedure

  1. Discard the brake hose fitting gaskets.
  2. Install 2 new brake hose fitting gaskets.

3

Brake Hose Fitting

4

Brake Pipe Fitting

Procedure

  1. Remove any dirt or debris from the brake pipe fitting.
  2. Cap the brake pipe fittings to prevent brake fluid loss and contamination.

Tighten
25 N·m (18 lb ft)

5

Hose Bracket to Rear Axle Bolt

Tighten
9 N·m (80 lb in)

6

Brake Hose

Procedure

Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.