Rear License Plate Lamp Replacement. GMC Truck Sierra Denali 2009

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2009 🢒 Sierra Denali 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear License Plate Lamp Replacement

Rear License Plate Lamp Replacement Silverado

Ensure the headlamp switch is in the OFF position.
Reach under the rear bumper and press on the lens end of the cover in order to release the locking tab.
Remove the lens housing from the bumper assembly.
Remove the bulb.

Install the bulb.
Install the rear edge of the lens housing into the rear bumper.
Push on the lens side of the housing in order to snap the housing into the rear bumper assembly.
Inspect the operation.

Callout	Component Name
1	License Plate Lamp Electrical Connector Tip Disconnect the electrical connector from the rear junction block.
2	Rear License Plate Lamp Assembly

Callout

Component Name

License Plate Lamp Electrical Connector

Tip
Disconnect the electrical connector from the rear junction block.

Rear License Plate Lamp Assembly