Special Tools

J 5825-A Crankshaft Gear Remover

For equivalent regional tools, refer to Special Tools.

1. Remove the crankshaft position sensor reluctor ring.



2. Remove the timing chain tensioner shoe (229) using a downward motion.
3. Remove the timing chain tensioner bracket bolt and bracket (227 and 228).



4. Check the camshaft timing chain free play.

4.1.	Rotate the camshaft sprocket (1) counterclockwise until all slack is removed from the camshaft timing chain (2).

4.2.	Measure the free play on the slack side (3) of the camshaft timing chain.

If the camshaft timing chain can be moved side to side in excess of 11 mm (0.43 in), dimension a, replacement of the camshaft timing chain and the sprockets is recommended during assembly.




5. Remove the camshaft sprocket bolts.



6. Remove the camshaft sprocket and the camshaft timing chain.

Warning: Refer to Safety Glasses Warning in the Preface section.




7. Remove the crankshaft sprocket using the J 5825-A remover .



8. Remove the crankshaft balancer key.