GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 2WD 🢒 General Information 🢒 General Information 🢒 Transfer Case Shield Replacement

Removal Procedure

    Object Number: 396828 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the transfer case shield bolts, if equipped.
  3. Remove the transfer case shield, if equipped.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 396828 Size: SH
  1. Position the transfer case shield to the crossmember, if equipped.
  2. Install the transfer case shield bolts, if equipped.

    3. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  3. Lower the vehicle.