GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 2WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Belt Retractor Replacement

Rear Seat Belt Retractor Replacement Extended Cab

Caution: To avoid personal injury to the occupants of the vehicle, observe the following precautions:

   • More than one supplier's seat belts are used, therefore, install ONLY the seat belt components specified in the GM parts catalog.
   • To verify that the correct seat belt components were installed, insert the seat belt latch in the seat belt buckle. The latch must be fully seated and be retained in the buckle until purposely released.

Removal Procedure
  1. Remove the rear seat. Refer to Rear Seat Replacement .

    2. Object Number: 363703 Size: SH
  2. Remove the seat belt guide cover (1).
  3. Remove the rear seat belt to body bolts (2).
  4. Remove the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .

    5. Object Number: 363681 Size: SH
  5. Remove the rear seat belt retractor to body bolt (1).
  6. Remove the retractor from the vehicle.

Installation Procedure
  1. Install the retractor to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 363681 Size: SH
  2. Install the rear seat belt retractor to body bolt (1).

    3. Tighten
    Tighten the bolt to 53 N·m (39 lb ft).

  3. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .

    4. Object Number: 363703 Size: SH
  4. Install the rear seat belt to body bolts (2).

    5. Tighten
    Tighten the bolts to 53 N·m (39 lb ft).

  5. Install the seat belt guide cover (1).

    6. Object Number: 363716 Size: SH
  6. Install the rear seat. Refer to Rear Seat Replacement .

Rear Seat Belt Retractor Replacement Crew Cab

Caution: To avoid personal injury to the occupants of the vehicle, observe the following precautions:

   • More than one supplier's seat belts are used, therefore, install ONLY the seat belt components specified in the GM parts catalog.
   • To verify that the correct seat belt components were installed, insert the seat belt latch in the seat belt buckle. The latch must be fully seated and be retained in the buckle until purposely released.

Removal Procedure
  1. Remove the rear seat, if required. Refer to Rear Seat Replacement .
  2. Remove the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement
  3. Remove the rear seat belt to body bolts.

    4. Object Number: 363681 Size: SH
  4. Remove the rear seat belt retractor to body bolt (1).
  5. Remove the retractor from the vehicle.

Installation Procedure
  1. Install the retractor to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 363681 Size: SH
  2. Install the rear seat belt retractor to body bolt (1).

    3. Tighten
    Tighten the bolt to 53 N·m (39 lb ft).

  3. Install the rear seat belt to body bolts.

    4. Tighten
    Tighten the bolts to 53 N·m (39 lb ft).

  4. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  5. Install the rear seat, if removed. Refer to Rear Seat Replacement .