Tools Required

J 41712 Oil Pressure Sensor Socket

1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
2. Disconnect the oil pressure sensor electrical connector (2).



3. Using J 41712 or equivalent, remove the oil pressure sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers for the correct part number.
2. Using J 41712 or equivalent, install the oil pressure sensor.

Tighten
Tighten the sensor to 30 N·m (22 lb ft).




3. Connect the oil pressure sensor electrical connector (2).
4. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .