GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 926211  Size: SH
  1. Remove the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement.
  2. Remove the seat belt retractor bolts (1) from the seat belt retractor.
  3. Remove the seat belt retractor from the vehicle.

Installation Procedure


    Object Number: 926211  Size: SH
  1. Install the seat belt retractor to the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the seat belt retractor bolts (1) to the vehicle and tighten to 52 N·m (38 lb ft).
  4. Install the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement.