GM Service Manual Online
For 1990-2009 cars only

Rear Side 60/40 Door Trim Panel Replacement - Right Side E24, 40 Door

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure


    Object Number: 879680  Size: SH
  1. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1).
  2. Carefully pull the door trim panel (1) out of the retainers around the window opening.
  3. A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

  4. Remove the front door panel (1) from the vehicle.

Installation Procedure


    Object Number: 879680  Size: SH
  1. Install the door trim panel (1) to the door by performing the following:
  2. Align the door trim panel (1) to the retainers in the window opening.

  3. Push towards the door to engage the retainers.
  4. Align the retainers on the edges of the lower portion of the door trim (1).
  5. Push towards the door to engage the retainers.

Rear Side 60/40 Door Trim Panel Replacement - Right Side E24, 60 Door

Special Tools

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure


    Object Number: 879694  Size: SH
  1. Remove the rear side door trim plate. Refer to Rear Door Trim Plate Replacement.
  2. Remove the side door pull handle screws.
  3. Remove the side door pull handle.
  4. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1)
  5. Carefully pull the door trim panel (1) out of the retainers around the window opening.
  6. A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

  7. Remove the door panel (1) from the vehicle.

Installation Procedure


    Object Number: 879694  Size: SH
  1. Install the door trim panel (1) to the door by performing the following:
  2. • Align the door trim panel (1) to the retainers in the window opening.
    • Push towards the door to engage the retainers.
    • Align the retainers on the edges of the lower portion of the door trim (1).
    • Push towards the door to engage the retainers.

    Caution: Refer to Fastener Caution in the Preface section.

  3. Install the pull handle and screws and tighten to 1.9 N·m (17 lb in).
  4. Install the rear side door trim plate. Refer to Rear Door Trim Plate Replacement.