GM Service Manual Online
For 1990-2009 cars only

Special Tools

    • J 36850 Assembly Lubricant
    • J 38358-A Forward Clutch Assembly Remover/Installer

For equivalent regional tools, refer to Special Tools.


    Object Number: 335049  Size: SH
  1. Align the direct clutch plates in order to aid in the installation of the forward clutch housing assembly (602).
  2. Note: Following installation of the forward clutch housing assembly (602), the distance between the top of the speed sensor ring and the pump gasket surface should be approximately 98-99 mm (3.85-3.89 in).

  3. Using the J 38358-A remover/installer , install the forward clutch housing assembly (602).
  4. Install the overdrive carrier/forward clutch thrust bearing assembly (601) (silver side up) onto the forward clutch housing assembly (602). Retain with J 36850 lubricant or equivalent.