GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2006 🢒 Savana - AWD 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Gear Outlet Pipe/Hose Replacement

Removal Procedure

    Notice: Refer to Power Steering Hose Disconnected Notice in the Preface section.


    Object Number: 829005 Size: SH
  1. Install a drain pan under the vehicle.
  2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the power steering outlet hose from the power steering pump.
  5. Remove the power steering gear outlet hose from the power steering gear.
  6. Remove the power steering gear outlet hose from the vehicle.

Installation Procedure

    Object Number: 829005 Size: SH

    Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier. Failure to follow these procedures could result in component damage.

  1. Route the hose in the same position the hose occupied prior to removal.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the steering gear outlet hose to the power steering gear.

    3. Tighten
    Tighten the hose fitting to 33 N·m (24 lb ft).

  3. Install the power steering outlet hose to the power steering pump.
  4. Lower the vehicle.
  5. Bleed the power steering system. Refer to Power Steering System Bleeding .
  6. Remove the drain pan from under the vehicle.