GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 885209  Size: SH
  1. Open cover and remove screw, if equipped with roof rail inflatable restraints.
  2. Pull out on the center pillar garnish (1 ,2) molding to disengage the clips.
  3. Remove the center pillar garnish molding.

Installation Procedure


    Object Number: 885209  Size: SH
  1. Align the body side upper (1 ,2) garnish molding clips to the holes in the body.
  2. Push in on the body side upper (1 ,2) garnish molding to engage the clips.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install screw and close cover, if equipped with roof rail inflatable restraints and tighten to 2 N·m(18  lb in).