For 1990-2009 cars only
- Remove the roller clutch assembly (652) from the forward clutch support (656) by turning the roller clutch assembly (652) clockwise and gently lifting upward.
- Remove the thrust bearing (113) from the forward clutch support (656).
- Remove the final drive sun gear shaft snap ring (660).
- Remove the parking pawl gear (659).
- Remove the forward clutch support to parking pawl gear thrust bearing (658).
- Remove the forward clutch support (656) from the final drive sun gear shaft (651).
- Remove and discard the two seals (654) from the forward clutch support (656).
- Inspect the snap ring for overextension (660).
- Inspect the seal grooves for damage (656).
- Inspect for signs of excessive bearing and bushing wear.
- Inspect the splines and the parking gear teeth for cracks or excessive wear.
- Inspect the fluid feed holes for the proper opening.
- Inspect all other components for excessive wear or damage.
- Clean and dry all of the components.
Important: The parking pawl pin has a pressed fit into the forward clutch support. The parking pawl pin is not serviceable. Do not remove the parking pawl pin.
