GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Savana 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Cruise Control Module Replacement

Removal Procedure
  1. Raise and support the hood.
  2. Remove the air cleaner assembly from the vehicle.
    3. • For the 4.3L engine, refer to Air Cleaner Assembly Replacement.
    • For the 4.8L, 5.3L, and 6.0L engine, refer to Air Cleaner Assembly Replacement.
  3. Disconnect the electrical connector from the cruise control module.
  4. Disconnect the cruise control cable from the cruise control module. Refer Cruise Control Cable Replacement.

    5. Object Number: 332346 Size: SH
  5. Remove the nuts (2) that retain the cruise control module to the cruise control bracket.
  6. Remove the cruise control module (3) from the cruise control bracket (1).
  7. Remove the cruise control module (3) from the vehicle.

Installation Procedure

    Object Number: 332346 Size: SH
  1. Install the cruise control module (3) to the vehicle.
  2. Install the cruise control module (3) to the cruise control bracket (1).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts (2) that retain the cruise control module (3) to the cruise control bracket (1).

    4. Tighten
    Tighten the nuts to 5 N·m (44 lb in).

  4. Connect the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement.
  5. Connect the electrical connector to the cruise control module.
  6. Install the air cleaner assembly to the vehicle.
    7. • For the 4.3L engine, refer to Air Cleaner Assembly Replacement.
    • For the 4.8L, 5.3L, or 6.0L engine, refer to Air Cleaner Assembly Replacement.
  7. Close the hood.
  8. Refer to Control Module References for programming and setup information.