GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2004 🢒 Savana 🢒 Transmission/Transaxle 🢒 Manual Transmission - NV 3500 🢒 Input Shaft Bearing Retainer Assembly

Disassemble Procedure

    Object Number: 761084 Size: SH
  1. Remove the seal from the main drive gear bearing retainer. Pry the seal out with a small pry bar or the equivalent.
  2. Clean the seal bore.

Assemble Procedure

    Object Number: 548122 Size: SH

    Important: When installing the input shaft bearing retainer oil seal, ensure the lip of the oil seal is installed toward the installing tool.

  1. Install the oil seal into the main drive gear bearing retainer using a suitable installing tool.
  2. Ensure the seal is fully seated.