Tools Required

1. Remove the brake apply cover bolts.
2. Remove the brake apply cover (1).
3. Remove the gasket.



4. Compress the reverse brake piston using J 41681 and J 23327 .
5. Remove the snap ring.
6. Remove the return springs (1).
7. Remove the retainer.



8. Cover the reverse brake piston with a clean cloth.
9. Slowly apply low pressure compressed air to the fluid passage B (2) while holding the fluid passage A (1) closed until the pistons are released from the case.



10. Remove the following loose components from the case.

•	The outer reverse brake piston (1)

•	The reaction sleeve (2)

•	The inner reverse brake piston (3)

11. Remove the piston O-ring seals.