GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2004 🢒 Savana 🢒 Engine 🢒 Engine Mechanical - 4.8L, 5.3L, and 6.0L 🢒 Oil Pan Cover Replacement

Removal Procedure

    Object Number: 260125 Size: SH
  1. Drain the engine oil.
  2. Remove the oil pan cover bolts (1), cover (2), and gasket (3).
  3. Discard the gasket.

Installation Procedure

    Object Number: 260125 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install a new oil pan cover gasket (3), the cover (2) and bolts (1).

    2. Tighten
    Tighten the oil pan cover bolts to 12 N·m (106 lb in).

  2. Refill the engine oil. Refer to Approximate Fluid Capacities and/or Fluid and Lubricant Recommendations .