For 1990-2009 cars only
- Using a 30-32 mm (1 3/16 inch) deep well socket or box end wrench, depress the four tabs on internal wiring harness connector (1). With the tabs depressed, gently pop the connector into and through main housing (2) with the palm of the hand.
- Disconnect internal wiring harness (2) from the following components:
- Remove solenoid retainers (1) from solenoids (4) and (5).
- Remove internal wiring harness (2) from main valve body (10).
- Install solenoid retainers (1).
| • | A trim solenoid (8) |
| • | C ON/OFF shift solenoid (7). |
| • | B trim solenoid (6) |
| • | E ON/OFF shift solenoid (5) |
| • | D ON/OFF shift solenoid (4) |
| • | F trim solenoid (3) |
| • | Pressure switch assembly (9) |
