GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Savana 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Center Roller Bracket Replacement

Removal Procedure

    Object Number: 334047 Size: SH
  1. Remove the sliding door trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .
  2. Open the door partially and support the door.
  3. Remove the bolts (4) that retain the sliding side door center roller bracket (1) to the door.
  4. Remove the nuts (2) that retain the sliding side door center roller bracket (1) to the door.
  5. Slide the sliding side door center roller bracket (1) from the rear of the track.
  6. Remove the sliding side door center roller bracket (1) from the vehicle.

Installation Procedure

    Object Number: 334047 Size: SH
  1. Install the sliding side door center roller bracket (1) to the vehicle.
  2. Slide the sliding side door center roller bracket (1) into the rear of the track.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts (2) in order to retain the sliding side door center roller bracket (1) to the door.

    4. Tighten
    Tighten the retaining nuts to 25 N·m (18 lb ft).

  4. Install the bolts (4) in order to retain the sliding side door center roller bracket (1) to the door.

    5. Tighten
    Tighten the retaining bolts to 25 N·m (18 lb ft).

  5. Install the sliding door trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .
  6. Close the door and inspect the operation of the door.