GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 334040  Size: SH
  1. Remove the inside door handle. Refer to Sliding Door Inside Handle Replacement .
  2. Remove the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement .
  3. Pull out on the sliding side door trim panel in order to disengage the retainers.
  4. Remove the sliding side door lower trim panel from the vehicle.
  5. Remove the door handle bezel from the trim panel, if replacing the trim panel.
  6. Remove the trim panel cover from the trim panel, if replacing the trim panel.

Installation Procedure


    Object Number: 334040  Size: SH
  1. Install the trim panel cover to the trim panel.
  2. Install the door handle bezel to the trim panel.
  3. Install the sliding side door trim panel by aligning the retainers on the panel to the slots in the door.
  4. Push the door panel towards the door to engage the retainers.

  5. Install the sliding door garnish molding. Refer to Rear Side Door Garnish Molding Replacement .
  6. Install the inside door handle. Refer to Sliding Door Inside Handle Replacement .