Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Audible Warnings Schematics | ||||
1 | Did you review the Audible Warning Description and Operation? | -- | Go to Step 2 | |
2 | Do any indicators illuminate when the chime sounds? | -- | Go to Step 3 | |
3 |
Does the chime activate? | -- | Go to Step 4 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
4 | With the key in the ignition switch, disconnect the left front door jamb switch. Does the chime stop? | -- | Go to Step 11 | Go to Step 5 |
5 | With the left front door closed, test the drivers door switch signal for a short to ground. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 6 |
6 | Test the key-in-ignition warning switch for continuity with the key removed. Is continuity present? | -- | Go to Step 10 | Go to Step 7 |
7 |
Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 8 |
8 | Test the lamps on input circuit for a short to voltage. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you complete the replacement? | -- | Go to Step 12 | Go to Step 9 |
9 | Replace the multifunction alarm module. Refer to Multifunction Alarm Module Replacement in Instrument Panel, Gages and Console. Did you complete the replacement? | -- | Go to Step 12 | -- |
10 | Replace the key-in warning switch. Refer to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column - Standard or to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | Go to Step 12 | -- |
11 | Replace the left front door jamb switch. Refer to Door Jamb Switch Replacement in Doors. Did you complete the replacement? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
