GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Savana 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Remove the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.

    2. Object Number: 182651 Size: SH
  2. Remove the electrical connector.
  3. Remove the retainer from the switch.
  4. Remove the indicator switch from the vehicle.

Installation Procedure

    Object Number: 182651 Size: SH
  1. Connect the indicator switch to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Connect the retainer to the switch.

    3. Tighten
    Tighten the indicator switch retaining screw to 4 N·m (35 lb in).

  3. Install the electrical connector.
  4. Install the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.