Was the DRL System Check performed?

--

Go to Step 2

Go to Daytime Running Lights (DRL) System Check

1. Disconnect the connector at the instrument cluster.
2. Connect a J 39200 DMM between the daytime running lamp (DRL) control module connector, cavity G, and the instrument cluster connector, cavity A17, for CKT 592 (LT GRN/BLK).

Is continuity present?

--

Go to Step 4

Go to Step 3

Repair the open in CKT 592 (LT GRN/BLK) between the instrument cluster and the DRL control module.

Is the DRL indicator operative?

--

Go to Daytime Running Lights (DRL) System Check

Go to Step 4

1. Place the ignition switch in the RUN position.
2. Connect an unpowered test lamp between the instrument cluster connector, cavity B17, and ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 8

Is the filament of the DRL indicator lamp open?

--

Go to Step 6

Go to Step 7

Replace the DRL indicator lamp.

Is the DRL indicator operative?

--

Go to Daytime Running Lights (DRL) System Check

Go to Step 7

Replace the instrument cluster.

Is the DRL indicator operative?

--

Go to Daytime Running Lights (DRL) System Check

Go to Step 8

Repair the open in CKT 39 (PNK) between splice S216 and the instrument cluster.

Is the DRL indicator operative?

--

Go to Daytime Running Lights (DRL) System Check

--