Was the Power Door Locks System Check performed?

--

Go to Step 2

Go to Power Door Locks System Check

1. Remove the power door lock relay from the connector.
2. Connect an unpowered test lamp between the power door lock relay connector, cavity F for CKT 195 (LT BLU), and ground.
3. Depress any power door lock switch to perform the lock operation.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the power door lock relay.

Is the repair complete?

--

Go to Power Door Locks System Check

--

Repair the open in CKT 195 (LT BLU) between splice S241 and the power door lock relay.

Refer to Wiring Repairs

Is the repair complete?

--

Go to Power Door Locks System Check

--