- Raise and support the hood.
- Remove the air cleaner assembly from the vehicle. Refer to one
of the following procedures:
| • | Air Cleaner Assembly Replacement in Engine Controls-4.3L |
| • | Air Cleaner Assembly Replacement in Engine Controls-5.0, 5.7L |
- Disconnect the electrical connector from the cruise control module.
- Disconnect the cruise control cable from the cruise control module.
Refer
Cruise Control Cable Replacement
.
- Remove the nuts (2)
that retain the cruise control module to the cruise control bracket.
- Remove the cruise control module (3) from the cruise control
bracket (1).
- Remove the cruise control module (3) from the vehicle.
Installation Procedure
- Install the cruise control
module (3) to the vehicle.
- Install the cruise control module (3) to the cruise control
bracket (1).
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the nuts (2)
that retain the cruise control module (3) to the cruise control bracket (1).
Tighten
Tighten the nuts to 5 N·m (44 lb in).
- Connect the cruise control cable to the cruise control module.
Refer to
Cruise Control Cable Replacement
.
- Connect the electrical connector to the cruise control module.
- Install the air cleaner assembly to the vehicle. Refer to one
of the following procedures:
| • | Air Cleaner Assembly Replacement in Engine Controls-4.3L |
| • | Air Cleaner Assembly Replacement in Engine Controls-5.0, 5.7L |
- Close the hood.
