Did you perform the Audible Warning System Check?

--

Go to Step 2

Go to Audible Warnings System Check

1. Adjust the instrument panel (IP) dimmer switch to maximum brightness.
2. Disconnect the connector at the multi-function alarm module.
3. Connect a unpowered test lamp between the multi-function alarm module connector, cavity A1 for CKT 8 (GRY), and ground.
4. Place the ignition switch in the RUN position.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the multi-function alarm module. Refer to Multifunction Alarm Module Replacement .

Is the lights-on chime inoperative?

--

Go to Audible Warnings System Check

--

Repair the open in CKT 8 (GRY) between splice S223 and the multi-function alarm module.

Is the lights-on chime inoperative?

--

Go to Audible Warnings System Check

--