Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Power Antenna System Check performed? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 9 |
3 | Connect a digital multimeter J 39200 between the power antenna assembly connector, pin C for CKT 150 (BLK) and ground. Is continuity present? | -- | Go to Step 4 | Go to Step 10 |
4 |
Does the test lamp light? | -- | Go to Step 11 | Go to Step 5 |
5 |
Is continuity present? | -- | Go to Step 12 | Go to Step 6 |
6 | Connect a J 39200 between the radio C1 connector, cavity 8 and power antenna assembly connector, pin B for CKT 314 (PNK). Is continuity present? | -- | Go to Step 7 | Go to Step 13 |
7 | Connect an unpowered test lamp between the radio C1 connector, cavity 10 for CKT 1140 and ground. Does the test lamp light? | -- | Go to Step 8 | Go to Step 14 |
8 |
Does the power antenna assembly raise? | -- | Go to Step 15 | Go to Step 11 |
9 | Repair the open in CKT 1140 (ORN) between the IP fuse block and the power antenna assembly connector. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
10 | Repair the open in CKT 150 (BLK) between the power assembly connector and ground G201. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
11 | Replace the power antenna assembly. Refer to Power Antenna Assembly Replacement . Is the repair complete? | -- | -- | |
12 | Repair the short to ground in CKT 314 (PNK) between the radio C1 connector and the power antenna assembly. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
13 | Repair the open in CKT 314 (PNK) between the radio C1 connector and the power antenna assembly connector. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
14 | Repair the open in CKT 1140 (ORN) between the radio C1 connector and splice S219. Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
15 | Replace the radio. Refer to Radio Replacement . Is the repair complete? | -- | -- |
