GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 158290  Size: SH
  1. Remove the shoulder/seat belt guide retaining bolt from the shoulder belt guide adjuster.
  2. Remove the shoulder/seat belt guide from the shoulder belt guide adjuster.
  3. Remove the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement in Interior Trim.
  4. Remove the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement in Interior Trim.

  5. Object Number: 158293  Size: SH
  6. Remove the shoulder/seat belt retractor retaining bolt from the lower pillar.
  7. Remove the shoulder/seat belt retractor assembly from the vehicle.

Installation Procedure


    Object Number: 158293  Size: SH
  1. Install the shoulder/seat belt retractor assembly to the vehicle.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the shoulder/seat belt retractor retaining bolt to the lower pillar.
  4. Tighten
    Tighten the shoulder/seat belt retractor retaining bolt to 52 N·m (38 lb ft).

  5. Install the front door lower pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement in Interior Trim.
  6. Install the front door upper pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement in Interior Trim.

  7. Object Number: 158290  Size: SH
  8. Install the shoulder/seat belt guide to the shoulder belt guide adjuster.
  9. Install the upper shoulder/seat belt guide retaining bolt to the vehicle.
  10. Tighten
    Tighten the upper shoulder/seat belt guide retaining bolt to 52 N·m (38 lb ft).