GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 Safari - 4WD 🢒 Brakes 🢒 Disc Brakes 🢒 Front Brake Shield Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the brake rotor. Refer to Brake Rotor Replacement in Disc Brakes.

    4. Object Number: 675091 Size: SH
  4. Remove the 2 wheel hub and bearing mounting bolts that secure the splash shield to the spindle.
  5. Remove the splash shield.

Installation Procedure
  1. Install the splash shield.

    2. Object Number: 675091 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 wheel hub and bearing mounting bolts that secure the splash shield to the spindle.

    3. Tighten
    Tighten the wheel hub and bearing mounting bolts to 90 N·m (66 lb ft).

  3. Install the brake rotor. Refer to Brake Rotor Replacement in Disc Brakes.
  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.