GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Remove the cruise control cable. Refer to Cruise Control Cable Replacement .
  3. Disconnect the electrical connector.

  4. Object Number: 293665  Size: SH
  5. Remove the cruise control module bolts.
  6. Remove the cruise control module.

Installation Procedure


    Object Number: 293665  Size: SH
  1. Install the cruise control module.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the cruse control module bolts.
  4. Tighten
    Tighten the cruise control module bolts to 12 N·m (106 lb in).

  5. Connect the electrical connector.
  6. Install the cruise control cable. Refer to Cruise Control Cable Replacement .
  7. Connect the negative battery cable.
  8. Perform the functional check.